Departments

Cover Firearms TALO showcase Suppressors Ammunition Knives Release alerts

The technology listingsQUIET DESKFlow paths · Materials · Mounts · Independent proof

Suppressor technology desk

Quiet is only
part of the story.

Gun Editions tracks the releases moving suppressor design forward: additive manufacturing, new flow paths, lower back pressure, modular architecture, lighter alloys, improved mounting, and purpose-built firearm pairings.

Open the records ↓Contact the makers ↗

01Flow

Gas routing and lower-back-pressure systems.

02Print

Complex structures enabled by additive manufacturing.

03Fit

HUB, fast-attach, direct-thread, and platform-specific mounting.

04Proof

Specs and claims tied back to a visible primary source.

Current release file

New systems.
Permanent records.

This is a curated launch desk, not a paid ranking. Every card identifies its evidence quality and links to the maker page or manufacturer-submitted release used to verify the record.

Backdraft Suppressors · Lightweight multi-caliber aluminum rifle and pistol suppressor family

Hunter

Three- or six-baffle non-modular architecture · 1.375×24 HUB/Bravo interface · compatible 1/2×28 and 5/8×24 direct-thread adapters

Backdraft offers the aluminum Hunter in three lengths and five bore sizes. The official page specifies a 1.375×24 HUB interface, hard-anodized finish and no full-auto rating. Backdraft rates the standard Hunter through .308 Winchester with a 20-inch-or-longer barrel and the paid magnum configuration through .300 PRC with a 26-inch-or-longer barrel. Published sound levels, temperature limits and performance language remain attributed manufacturer claims, not independent test results.

Caliber: 5.56mm · 6.5mm · 7.62mm · 9mm · .45 caliber
Material: Aluminum · hard-anodized finish
Weight: 4.4 oz (4 in) · 6.8 oz (6 in) · 8.3 oz (8 in) · may vary by bore
Length: 3.84 in · 5.96 in · 7.96 in · 1.62 in diameter
Release: Current catalog backfill · November 9, 2026 Burris promotion documented · original launch date unpublished
SKU / config.: SKU and UPC not published on the official configurable product page

BANISH · Hard-use additively manufactured 7.62 rifle suppressor

HD 762 INC

Nine-baffle controlled-flow architecture with helical vents · industry-standard 1.375×24 HUB · included 5/8×24 direct-thread mount · full-auto rated · no barrel-length restrictions

BANISH describes the HD 762 INC as a hard-use 7.62 suppressor printed entirely from Inconel 718. Its nine-baffle controlled-flow architecture uses helical vents to manage gas; the exact page publishes HUB compatibility, an included 5/8×24 direct-thread mount, full-auto capability and no barrel-length restrictions. Sound, backpressure, flash and durability statements remain attributed manufacturer claims, not independent test results.

Caliber: 5.56 NATO through .300 RUM · high-pressure rifle cartridges
Material: 100% additively manufactured Inconel 718 · black or FDE Cerakote
Weight: 15.9 oz
Length: 6.7 in · 1.65 in diameter
Release: Announced November 5, 2026 · available now
SKU / config.: SKU and UPC not published

QuietFlow · Additively manufactured .30-caliber HUB suppressor

AIRCHOPA 30Ti

Eight-baffle 3D-printed architecture · patent-pending Zero Flow baffle-tip geometry · 1.375×24 HUB/Bravo interface · included 5/8×24 direct-thread hub

QuietFlow, a stand-alone GForce Arms suppressor brand, launched the AIRCHOPA 30Ti as the titanium .30-caliber model in its four-suppressor starting lineup. The official page limits the lightweight internal-lattice design to fewer than 15 rounds per minute, particularly with magnum cartridges. QuietFlow's published .308 Win sound-reduction figures and its performance language remain attributed manufacturer test claims, not independent measurements.

Caliber: .223 Rem / 5.56 NATO through .300 PRC
Material: 3D-printed titanium · Cerakote C-Series Tungsten Gray
Weight: 8.3 oz
Length: 6.65 in
Release: Starting lineup and official product site launched November 4, 2026 · model-specific release distributed November 10
SKU / config.: SKU QFAC30TI · UPC not published

QuietFlow · Vented stainless multi-caliber HUB suppressor

ENGINE NO. 9

Ten-baffle vented design · full-auto rated · 1.375×24 HUB/Bravo interface · included 1/2×28 and 5/8×24 direct-thread hubs

ENGINE NO. 9 is QuietFlow's welded 17-4 stainless workhorse for pistol-caliber carbines and centerfire range rifles. The exact page publishes its unusually broad .17 HMR-to-.338 Win Mag rating, full-auto status, HUB mount and two included direct-thread hubs. QuietFlow's reduced-blowback and 9mm sound-reduction statements remain attributed manufacturer claims.

Caliber: .17 HMR through .338 Win Mag
Material: Machined and welded 17-4 stainless steel · black finish
Weight: 16.3 oz
Length: 6.74 in · 1.62 in diameter
Release: Starting lineup and official product site launched November 4, 2026
SKU / config.: SKU QFEN9 · UPC not published

QuietFlow · Sealed additively manufactured rimfire direct thread

THROTTLE 22Ti

Eleven-baffle sealed non-serviceable body · 1/2×28 direct thread · full-auto rated for rimfire only

QuietFlow launched the sealed THROTTLE 22Ti as its 3.7-ounce additive-manufactured rimfire model. The exact page publishes an eleven-baffle body, 1/2×28 mount, .22 LR-to-5.7×28 FN compatibility and a rimfire-only full-auto rating. The maker's sound-reduction figures remain attributed in-house test claims.

Caliber: .22 LR through 5.7×28 FN
Material: 3D-printed titanium · Titanium Gray finish
Weight: 3.7 oz
Length: 5.25 in · 1.1 in diameter
Release: Starting lineup and official product site launched November 4, 2026
SKU / config.: SKU QFTHR22G · UPC not published

QuietFlow · User-serviceable rimfire direct thread

22-WHISTLER

Eleven-baffle serviceable construction · 1/2×28 direct thread · full-auto rated for rimfire only

The 22-WHISTLER is QuietFlow's user-serviceable rimfire model, combining 17-4 stainless and 7075 aluminum in an eleven-baffle 1/2×28 package. The exact page publishes the four compatible cartridges and a rimfire-only full-auto rating. Its October 2026 sound test and reduction figures remain attributed manufacturer results rather than independent measurements.

Caliber: .22 LR · .22 WMR · .17 HMR · 5.7×28 FN
Material: 17-4 stainless steel and 7075 aluminum · black finish
Weight: 6.6 oz
Length: 5.5 in · 1.125 in diameter
Release: Starting lineup and official product site launched November 4, 2026
SKU / config.: SKU GFA22W · UPC not published

Off Grid Suppressors · Additively manufactured rimfire direct thread

Scorpius

Monolithic 3D-printed architecture · sealed ultrasonic-cleaning design · 1/2×28 direct thread

Off Grid's October 26 lineup release identifies the Scorpius as its direct-thread titanium rimfire model. The official specification table gives a 1.95-ounce weight while the narrative on the same page says 2.2 ounces, so both published figures are preserved. Off Grid attributes top .22 LR performance at the 2025 Thunder Beast Silencer Summit and full-auto capability to the model; those remain manufacturer claims.

Caliber: .22 LR · .22 Mag · .17 HMR · 5.7×28mm
Material: Titanium · black or FDE Cerakote
Weight: 1.95 oz official specification · page narrative also says 2.2 oz
Length: 5 in · 1 in diameter
Release: Lineup launch announced October 26, 2026
SKU / config.: SKU and UPC not published

Off Grid Suppressors · Additively manufactured magnum rifle HUB suppressor

MERC

DMLS monolithic architecture · 1.375×24 HUB/Bravo interface · included 5/8×24 direct-thread adapter

The MERC is Off Grid's Grade 5 titanium, 7.62-class member of the October 26 lineup. Its official page publishes a 1.375×24 HUB/Bravo interface and included 5/8×24 adapter. Off Grid's reduced-back-pressure, gas-control and sound-performance statements remain attributed manufacturer claims; full-auto status is not published.

Caliber: .223 Rem through .300 Win Mag
Material: Grade 5 titanium (Ti-6Al-4V) · black or FDE Cerakote
Weight: 12.5 oz
Length: 7 in · 1.75 in diameter
Release: Lineup launch announced October 26, 2026
SKU / config.: SKU and UPC not published

Off Grid Suppressors · Additively manufactured 6mm-class HUB suppressor

MENACE

DMLS monolithic architecture · 1.375×24 HUB/Bravo interface · wrench flats

The MENACE is the Grade 5 titanium 6mm-class HUB model in Off Grid's October 26 release. The maker publishes full-auto capability, a sealed printed architecture and compatibility from .223 through 6mm Creedmoor. Claims about reduced back pressure, reduced gas blowback and sound performance remain attributed to Off Grid.

Caliber: 6mm Creedmoor · .243 Win · .223 Rem · 5.56 NATO
Material: Grade 5 titanium (Ti-6Al-4V) · black or FDE Cerakote
Weight: 10.9 oz
Length: 6 in · 1.75 in diameter
Release: Lineup launch announced October 26, 2026
SKU / config.: SKU and UPC not published

Off Grid Suppressors · Compact additively manufactured 5.56 direct thread

MINI MENACE

Monolithic additive manufacture · 1/2×28 direct thread · included 1/2×28 HUB adapter

The MINI MENACE is Off Grid's compact Inconel 5.56-class direct-thread model. The official page also lists .22-caliber variants and 5.7×28mm and says a 1/2×28 HUB adapter is included. Durability, gas-management and sound-performance language remains attributed to the manufacturer; full-auto status is not published.

Caliber: 5.56 NATO · .223 Rem · .22 Creedmoor · .22 ARC · .22 Hornet · 5.7×28mm
Material: Inconel · black or FDE Cerakote
Weight: 4.6 oz
Length: 5 in · 1.1 in diameter
Release: Lineup launch announced October 26, 2026
SKU / config.: SKU and UPC not published

Off Grid Suppressors · Compact additively manufactured 9mm HUB suppressor

AGENT INCO 9K

DMLS monolithic architecture · 1.375×24 HUB/Bravo interface

The AGENT INCO 9K is Off Grid's compact Inconel model for 9mm and subsonic .300 BLK. Its official page publishes a 1.375×24 HUB/Bravo interface and full-auto capability. Sound, gas-management, heat-resistance and durability statements remain attributed manufacturer claims.

Caliber: 9mm · .300 BLK subsonic
Material: Inconel · black or FDE Cerakote
Weight: 7.5 oz
Length: 5 in · 1.5 in diameter
Release: Lineup launch announced October 26, 2026
SKU / config.: SKU and UPC not published

Angstadt Arms · Limited-run integrally suppressed Ruger 10/22 barrel

Vanquish 22 M81 Woodland Limited Edition

Precision-ported, fully rifled and baffle-free integral suppression · Bentz match chamber · 0.920-inch bull contour

Angstadt capped this 10/22 Day edition at 25 integrally suppressed barrels. Weapon Works applies a four-color M81 Woodland Cerakote pattern and Angstadt adds flag laser engraving; the maker says no two patterns are identical. The underlying right-hand Ruger 10/22 barrel retains the standard Vanquish 22's 18.5-inch ported 416R stainless construction, Bentz chamber, 1:16 twist, 0.920-inch contour and baffle-free 6061 shroud. Subsonic, full-auto and maintenance statements remain attributed manufacturer claims. Exact-edition media and independent reviews were not found on launch day.

Caliber: .22 LR · right-hand Ruger 10/22 host
Material: 18.5-inch 416R stainless Shaw barrel · 6061 aluminum shroud · four-color M81 Woodland Cerakote by Weapon Works
Weight: 1.3 lb
Length: 18.5 in barrel · 0.920 in contour
Release: Launched October 22, 2026 · 25-unit run
SKU / config.: AAVIS22CUS · UPC not published

Foxtrot Mike Products · Integrally suppressed 9mm upper receiver

ISU-9

Patented ported-barrel integral suppression · ports intersect the rifling lands · internal gas labyrinth and baffle stack · forward flash-suppressor exhaust · forward and mil-spec rear charging

Foxtrot Mike integrates a precision-ported barrel, suppressor chamber, internal labyrinth, baffle stack and forward exhaust into a complete VFM-9-based upper. The company attributes reduced pressure spike, recoil and reciprocating mass, consistent cycling, subsonic performance with common ammunition and maintained accuracy to this design; those remain manufacturer claims. Mounting is integral to the upper rather than a separately published muzzle standard, and material, dimensions, weight, SKU and UPC remain unpublished.

Caliber: 9mm · designed for common 115-, 124- and heavier-grain ammunition
Material: Not published
Weight: Not published
Length: Not published
Release: Launched October 16, 2026
SKU / config.: SKU and UPC not published

Derya Arms · Ultra-light user-serviceable rimfire

OBone

Eight removable baffles · user-serviceable by hand · 1/2×28 direct thread · no published minimum barrel length

Derya's Jacksonville-made OBone uses eight removable 7075-T6 aluminum baffles and a serialized 4140 steel 1/2×28 mount in a 3.99-ounce body. It ships in a padded Derya handgun case with a bilingual manual. Derya reports a representative 112 dB reading; that figure remains an attributed manufacturer claim, not an independent measurement.

Caliber: .22 LR full-auto rated · .17 HMR and .22 WMR semi-auto rated
Material: Eight 7075-T6 aluminum baffles · 7075-T6 aluminum tube and front cap · serialized 4140 steel rear mount · black anodized body · black-nitride mount
Weight: 3.99 oz
Length: 5.25 in · 1.181 in diameter
Release: Launched October 15, 2026
SKU / config.: OBONE.SUP · UPC 810216300043

US PALM · K-length low-back-pressure 5.56 rifle

EOS-556

Additively manufactured low-back-pressure design · integrated flash hider · 1.375×24 HUB compatible · titanium 1/2×28 direct-thread mount included

US PALM's EOS-556 is a dedicated 5.56 model with a printed 718 Inconel body, integrated flash hider, HUB rear interface and included titanium direct-thread mount. Suppression, flash, durability and SOCOM-stress-test statements remain attributed manufacturer claims. Length, diameter and UPC remain unpublished.

Caliber: 5.56 NATO
Material: 3D-printed 718 Inconel
Weight: 12.5 oz
Length: Not published
Release: Available by October 8, 2026 · exact launch date not published
SKU / config.: SU0021011-N · UPC not published

US PALM · General-purpose low-back-pressure .30-caliber rifle

EOS-30

Additively manufactured low-back-pressure design · integrated flash hider · 1.375×24 HUB compatible · titanium 5/8×24 direct-thread mount included

US PALM positions the EOS-30 as its general-purpose .30-caliber model for 7.62 gas guns. The official page confirms printed 718 Inconel construction, a low-back-pressure architecture, integrated flash hider, HUB compatibility and an included titanium mount. Performance and stress-test statements remain attributed claims; length, diameter and UPC remain unpublished.

Caliber: .30 caliber · optimized for 7.62 gas-operated platforms
Material: 3D-printed 718 Inconel
Weight: 14.7 oz
Length: Not published
Release: Available by October 8, 2026 · exact launch date not published
SKU / config.: SU0021012-N · UPC not published

US PALM · Low-back-pressure .300 BLK titanium rifle

EOS-30Ti

Baffleless additively manufactured low-back-pressure design · integrated flash hider · 1.375×24 HUB compatible · titanium 5/8×24 direct-thread mount included

The titanium EOS-30Ti is optimized for semi-automatic .300 Blackout hosts and uses a baffleless printed architecture with low-back-pressure flow, an integrated flash hider and a HUB-compatible rear interface. Sound and back-pressure statements remain attributed US PALM claims. Length, diameter and UPC remain unpublished.

Caliber: .300 Blackout · optimized for semi-automatic gas-operated platforms
Material: 3D-printed titanium
Weight: 10.8 oz
Length: Not published
Release: Available by October 8, 2026 · exact launch date not published
SKU / config.: SU0021014-N · UPC not published

US PALM · AKM-specific low-back-pressure 7.62 suppressor

EOS-AK

Additively manufactured low-back-pressure design · integrated flash hider · AKM collet mounting system · 14×1 LH direct mount

The EOS-AK is purpose-built for AKM rifles with standard 14×1 LH threads and uses an AKM collet system instead of the HUB configuration published for the other EOS models. The official page confirms printed 718 Inconel construction, an integrated flash hider and low-back-pressure architecture. Suppression, durability and stress-test statements remain attributed claims; length, diameter and UPC remain unpublished.

Caliber: 7.62 mm · optimized for AKM platforms
Material: 3D-printed 718 Inconel
Weight: 15.4 oz
Length: Not published
Release: Available by October 8, 2026 · exact launch date not published
SKU / config.: SU0021013-N · UPC not published

CMMG · Ultra-compact user-serviceable rimfire

ZEROED 22 Mute-ish

Removable front and rear caps · indexed removable baffles · 1/4-inch hex front cap · 1/2×28 direct thread · included keychain adapter

CMMG's 2.875-inch rimfire suppressor uses a user-serviceable stack of 17-4 stainless-steel baffles inside an aluminum tube, with a steel 1/2×28 rear mount and an included keychain adapter. The full-auto .22 LR and semi-auto .17 HMR/.22 WMR ratings, along with sound-mitigation language, remain attributed CMMG claims. The product was backordered with a 12-to-14-week estimate when checked.

Caliber: .22 LR · .17 HMR and .22 WMR semi-auto rated
Material: 17-4 stainless-steel baffles · 6061-T6 aluminum tube and front cap · 4140 steel rear mount · hard-coat anodized
Weight: 3.4 oz
Length: 2.875 in · 1 in diameter
Release: Official product page live by October 10, 2026 · exact launch date not published
SKU / config.: 11DB122 · UPC 840442514518

San Tan Tactical · Compact dedicated 5.56 rifle

1836 Frontier 5.56

Stacked, fully welded baffle core · continuous 360-degree laser weld · 1.375×24 HUB-compatible rear interface · direct-thread mount included

San Tan Tactical's first published 1836 Frontier model is a compact stainless-steel 5.56 suppressor with a welded stacked-baffle core, continuous circumferential laser weld and industry-standard HUB rear interface. Durability and performance language in the launch material remains an attributed manufacturer claim; weight, diameter, SKU, UPC and the included direct-thread pitch remain unpublished.

Caliber: 5.56 NATO
Material: Precision-machined 17-4 stainless steel
Weight: Not published
Length: 6 in · diameter not published
Release: Announced October 9, 2026
SKU / config.: SKU and UPC not published · included direct-thread pitch not published

San Tan Tactical · Compact multi-caliber .30-caliber rifle

1836 Frontier .30

Stacked, fully welded baffle core · continuous 360-degree laser weld · 1.375×24 HUB-compatible rear interface · direct-thread mount included

The .30-caliber 1836 Frontier shares the six-inch 17-4 stainless construction, welded stacked-baffle core, continuous laser weld and HUB-compatible interface of the 5.56 model. San Tan specifically lists .308 Winchester and .300 Blackout among compatible cartridges. Durability and performance language remains attributed, while weight, diameter, SKU, UPC and the included direct-thread pitch remain unpublished.

Caliber: .30 caliber · .308 Win. · .300 Blackout · other compatible .30-caliber cartridges
Material: Precision-machined 17-4 stainless steel
Weight: Not published
Length: 6 in · diameter not published
Release: Announced October 9, 2026
SKU / config.: SKU and UPC not published · included direct-thread pitch not published

HUXWRX Safety Co. · Modular multi-platform pistol and subgun

FLOW 9 M

Flow-Through modular architecture · included piston and booster · optional direct-thread, 3-lug and Stiction Lock adapters

HUXWRX's modular FLOW 9 M combines a fully printed Grade 23 titanium body with full-length and short configurations for pistols, subguns and several listed cartridges. Sound, gas-mitigation, reliability and maintenance statements remain attributed manufacturer claims; the conflicting weight pairs on the official page are preserved rather than normalized.

Caliber: 9mm · .22 LR · .17 HMR · 5.7×28 mm · .300 BLK subsonic and supersonic · .350 Legend
Material: Fully 3D-printed Grade 23 titanium · C-Series Cerakote · black or FDE
Weight: 8.5 oz full / 6.3 oz short in official specifications · page introduction conflicts at 8.2 / 6.0 oz
Length: 8.6 in full / 6.3 in short · 1.38 in diameter
Release: Available October 1, 2026 · official launch release published October 2
SKU / config.: Official SKU and UPC not published · includes 1/2×28 piston and booster

HUXWRX Safety Co. · Compact HUB-compatible pistol-caliber carbine

FLOW 9k PCC

Flow-Through · 1.375×24 HUB compatible · included 1/2×28 direct-thread adapter · optional 3-lug, pistol, QD and Stiction Lock adapters

The FLOW 9k PCC is a compact, fully printed and HUB-compatible suppressor for fixed-barrel pistol-caliber carbines and other listed hosts. HUXWRX's product page specifies heat-treated 17-4 stainless steel, while a launch-release text says 14-4; Gun Editions treats the exact product page as controlling and discloses the conflict. Sound and gas-flow statements remain attributed manufacturer claims.

Caliber: 9mm · .22 LR · .17 HMR · 5.7×28 mm · .300 BLK subsonic and supersonic · .350 Legend
Material: Fully 3D-printed heat-treated 17-4 stainless steel · C-Series Cerakote · black or FDE
Weight: 8.5 oz official specification · page introduction conflicts at 8.0 oz
Length: 5.33 in · 1.47 in diameter
Release: Available October 1, 2026 · official launch release published October 2
SKU / config.: FDE distributor listing: MFG 3700 · UPC 810176430682 · black identifiers not officially published

Taurus · Rimfire and 5.7 direct thread

TTX22

Additively manufactured monocore · optimized gas-flow geometry · 1/2×28 direct thread

Taurus's first suppressor family opens with a four-caliber rimfire and 5.7 model built as an additively manufactured titanium monocore. The full-auto rating, gas-flow, recoil and back-pressure statements remain attributed manufacturer claims rather than independent measurements.

Caliber: .22 LR · .22 WMR · .17 HMR · 5.7×28 FN
Material: 3D-printed titanium · Cerakote C-Series
Weight: 3.71 oz
Length: 5.50 in · 1.00 in diameter
Release: Announced Sept. 18, 2026
SKU / config.: 7-TTX22 · UPC 725327944966

Taurus · Pistol-caliber carbine direct thread

TTX9C

Additively manufactured monocore · optimized gas-flow geometry · 1/2×28 direct thread

Taurus positions the booster-free TTX9C for fixed-barrel pistol-caliber carbines, with four listed chamberings and a titanium printed monocore. The full-auto rating, gas-flow, recoil and back-pressure statements remain attributed manufacturer claims rather than independent measurements.

Caliber: 9mm · .380 ACP · .32 ACP · .22 LR
Material: 3D-printed titanium · Cerakote C-Series
Weight: 11.50 oz
Length: 7.00 in · 1.50 in diameter
Release: Announced Sept. 18, 2026
SKU / config.: 7-TTX9C · UPC 725327944980

Taurus · .30-caliber rifle direct thread

TTX30

Additively manufactured monocore · optimized gas-flow geometry · 5/8×24 direct thread

The rifle member of Taurus's first suppressor family covers five listed cartridges and uses a 5/8×24 direct-thread titanium printed monocore. The full-auto rating, gas-flow, recoil and back-pressure statements remain attributed manufacturer claims rather than independent measurements.

Caliber: .300 BLK · .300 Win. Mag. · .308 Win. · 7.62×39 · 6.5 Creedmoor
Material: 3D-printed titanium · Cerakote C-Series
Weight: 14.31 oz
Length: 7.50 in · 1.75 in diameter
Release: Announced Sept. 18, 2026
SKU / config.: 7-TTX30 · UPC 725327944997

HUXWRX Safety Co. · Full-size dedicated 5.56 rifle

FLOW 556 Ti

Flow-Through · Torque Lock · integrated GeoFlash cap · QD mount

HUXWRX's full-size 5.56 suppressor combines a fully printed Grade 5 titanium body with the maker's Flow-Through, Torque Lock and GeoFlash technologies. Full-auto rating, no-barrel-restriction, sound, durability and gas-mitigation statements remain attributed manufacturer claims rather than independent measurements.

Caliber: 5.56 NATO
Material: Fully 3D-printed Grade 5 titanium · C-series high-temperature Cerakote · black or FDE
Weight: 11.4 oz / 323 g
Length: 6.8 in / 17.2 cm · 1.8 in diameter
Release: Current catalog backfill · verified Sept. 8, 2026 · exact launch date unpublished
SKU / config.: SKU and UPC not published · compatible with Muzzle Brake-QD 556 and Flash Hider-QD 556

Gemtech · Ultralight .30-caliber hunting and precision rifle

NEUTRINO

Fully 3D-printed core and tube · 1.375×24 HUB rear interface · included 5/8×24 direct-thread mount

Gemtech's current catalog identifies the NEUTRINO as an 8.8-ounce, HUB-compatible titanium rifle suppressor with a fully printed core and tube. Gemtech attributes recoil and sound-reduction performance to the design; Gun Editions records those statements as manufacturer claims rather than independent measurements.

Caliber: .30 caliber · .300 PRC · .300 Win. Mag. · .308 Win. · 6.5 Creedmoor
Material: 6Al-4V Grade 5 titanium · black high-temperature Cerakote · Armornite/PVD mount components
Weight: 8.8 oz with mount
Length: 6.5 in · 1.63 in diameter
Release: Official catalog marked New · verified Sept. 7, 2026 · exact launch date unpublished
SKU / config.: 14676 · UPC 022188908213

Gemtech · 5.7×28 mm and rimfire

NEBULA 5.7

3D-printed titanium core · stainless blast baffle · removable 1/2×28 direct-thread mount · Plan B interface

Gemtech lists the NEBULA 5.7 for 5.7×28 mm and three rimfire cartridges, with a titanium core, stainless blast baffle and removable direct-thread mount. Its full-auto rating and durability claims remain attributed to Gemtech; the maker page's conflicting length values are preserved below.

Caliber: 5.7×28 mm · .22 LR · .17 HMR · .22 WMR
Material: 4140 QPQ mount · 17-4 PH stainless tube · 6Al-4V titanium core · black high-temperature Cerakote
Weight: 9 oz
Length: 7.1 in structured specification · 7.8 in page description · 1.2 in diameter
Release: Official catalog marked New · verified Sept. 7, 2026 · exact launch date unpublished
SKU / config.: 14166 · UPC 022188904369

NewGE / SUP.0019

TENET · Ultralight precision-rifle direct thread

VESPER 30

Additively manufactured monolithic core · 5/8×24 direct thread

TENET's direct-thread .30-caliber VESPER is an 8-inch, sub-10-ounce titanium suppressor built around a monolithic printed core. The exact maker page reports 40 dB of reduction and 123 dBA at the shooter's ear with a 20-inch barrel and M80 ammunition; a release distributed through Shooting Wire reports 32 dB. Both remain attributed claims, and the unresolved source conflict is disclosed rather than normalized.

Caliber: .30 caliber
Material: 3D-printed Grade 5 titanium · black finish
Weight: 9.9 oz
Length: 8 in
Release: Launched Aug. 26, 2026 · available with an estimated four-week lead time
SKU / config.: TEN-VES-30-TI-DT-BLK · UPC 850090351137

NewGE / SUP.0020

TENET · Ultralight 6.5 precision-rifle direct thread

VESPER 6.5

Additively manufactured monolithic core · 5/8×24 direct thread

The 6.5 mm VESPER uses TENET's monolithic printed core in an 8-inch, 9.6-ounce direct-thread body. The exact maker page reports 40 dB of reduction and 122 dBA at the shooter's ear with a 20-inch 6.5 Creedmoor and 140-grain Sierra Match ammunition; a release distributed through Shooting Wire reports 32 dB. Both remain attributed manufacturer claims and are not independent measurements.

Caliber: 6.5 mm
Material: 3D-printed Grade 5 titanium · black finish
Weight: 9.6 oz
Length: 8 in
Release: Launched Aug. 26, 2026 · available with an estimated four-week lead time
SKU / config.: TEN-VES-65-TI-DT-BLK · UPC 850090351144

Angstadt Arms · Long multi-caliber pistol, PCC and rifle

Reticent 360L

DMLS internal architecture · HUB 1.375×24 compatibility · included 1/2×28 direct-thread mount

Angstadt's long .36-caliber Reticent uses direct metal laser sintering and standard HUB mounting while remaining 8.5 ounces without its included mount. The maker says it is not full-auto rated and publishes 130 dB for 9mm, 137 dB for 5.56 and 141 dB for .308; those sound figures and tone claims remain attributed manufacturer statements, not independent measurements.

Caliber: .36 caliber · pistols through 9mm · rifles through .360 caliber
Material: DMLS Grade 5 titanium · Armor Black C-Series high-temperature Cerakote
Weight: 8.5 oz without mount · 11 oz with mount
Length: 8 in · 1.55 in diameter
Release: Current 2026 catalog backfill · verified Sept. 4, 2026 · official launch date unpublished
SKU / config.: AARET36LTB · UPC not published

Angstadt Arms · Compact multi-caliber pistol, PCC and rifle

Reticent 360S

DMLS internal architecture · HUB 1.375×24 compatibility · included 1/2×28 direct-thread mount

The standard-length Reticent 360S uses direct metal laser sintering and standard HUB mounting in a 7-ounce, 6.8-inch body. Angstadt says it is not full-auto rated and publishes 134 dB for 9mm, 142 dB for 5.56 and 144 dB for .308; those sound and tone statements remain attributed manufacturer claims.

Caliber: .36 caliber · pistols through 9mm · rifles through .360 caliber
Material: DMLS Grade 5 titanium · Armor Black C-Series high-temperature Cerakote
Weight: 7 oz without mount · 9.5 oz with mount
Length: 6.8 in · 1.55 in diameter
Release: Current 2026 catalog backfill · verified Sept. 4, 2026 · official launch date unpublished
SKU / config.: AARET360TB · UPC not published

Angstadt Arms · Sealed rimfire

Reticent 22

DMLS sealed architecture · 1/2×28 direct thread

Angstadt's sealed .22 LR suppressor is DMLS-built entirely from Grade 5 titanium, mounts directly to 1/2×28 threads and is not full-auto rated. The maker reports a lowest shot of 113.4 dB and five-shot average of 115 dB on a Ruger Precision Rimfire using a specified Larson Davis meter and MIL-STD-1474D methodology; the figures remain attributed manufacturer test results.

Caliber: .22 LR
Material: DMLS Grade 5 titanium · Armor Black C-Series high-temperature Cerakote
Weight: 2.5 oz
Length: 5 in · 1 in diameter
Release: Current 2026 catalog backfill · verified Sept. 4, 2026 · official launch date unpublished
SKU / config.: AARET02228 · UPC not published

Dead Air Silencers · Over-the-barrel hunting and precision rifle

Nomad Ti OTB

3D-printed over-the-barrel architecture · integrated Xeno mount · included DA870 radial brake

Dead Air's additively manufactured titanium Nomad moves part of its 7.65-inch body behind the muzzle and uses Xeno mounting machined into the suppressor. It ships with a 5/8×24 DA870 radial brake, is not full-auto rated, and is incompatible with Browning Xeno Recoil Hawg brakes. Sound and recoil statements remain attributed manufacturer claims.

Caliber: .30 caliber · .300 RUM · 7mm Backcountry · 4,400+ ft-lb energy rating
Material: Additively manufactured 6Al-4V Grade 5 titanium · black or FDE high-temperature Cerakote
Weight: 10.5 oz
Length: 7.65 in · adds 4.6 in ahead of muzzle · 1.76 in diameter
Release: Official product page live · described as all-new Aug. 28, 2026
SKU / config.: NOMADTIOTBBLK · NOMADTIOTBFDE · black UPC 810128163910 · FDE UPC not published

Bersa B22 modular rimfire suppressor in black — NewGE / SUP.0025

Bersa USA · Modular rimfire and 5.7

B22

Tool-free modular body · user-serviceable · 1/2×28 direct thread

Bersa's modular, tool-free and user-serviceable rimfire suppressor uses titanium and stainless construction in short and full configurations. Bersa states that it is full-auto rated for .22 LR; all sound-reduction figures on the source page remain attributed manufacturer claims.

Caliber: .22 LR · .22 WMR · .17 HMR · .17 WSM · 5.7×28mm
Material: 6Al-4V titanium · 17-4 stainless steel · black high-temperature Cerakote
Weight: 4.5 oz short · 6.4 oz full
Length: 3.41 in short · 5.8 in full
Release: Launched and available Aug. 26, 2026
SKU / config.: BS-10001 · UPC not published

Bersa B9 modular pistol suppressor in black — NewGE / SUP.0026

Bersa USA · Modular pistol and subsonic rifle

B9

Tool-free modular body · user-serviceable · included 1/2×28 piston

A modular pistol suppressor with an included piston, titanium, stainless and aluminum construction and maker-published caliber and firing-schedule limits. Bersa's exact specification table highlights .300 Blackout subsonic while the product description lists broader compatibility; this record preserves the description's scope and does not infer unpublished ratings.

Caliber: 9mm · .22 LR · .300 BLK subsonic · .350 Legend · .357 Magnum · .38 Special
Material: Grade 9 titanium · 17-4 PH stainless · 7075-T6 aluminum
Weight: 9.2 oz short · 11.3 oz full
Length: 5.8 in short · 8 in full
Release: Launched and available Aug. 26, 2026
SKU / config.: BS-10002-F · UPC not published

Bersa USA · Hard-use rifle

B556

HUB 1.375×24 · included 1/2×28 direct-thread mount · full-auto rated

A compact Inconel-and-stainless rifle suppressor with standard HUB mounting and an included direct-thread adapter. Bersa publishes a full-auto rating and six-caliber compatibility; sound, flash and durability language remains attributed to the manufacturer.

Caliber: 5.56 NATO · .223 Rem · 6 ARC · .243 Win · 6 PRC · 6 Creedmoor
Material: Inconel 718 · 17-4 stainless steel · black high-temperature Cerakote
Weight: 15.2 oz
Length: 5.825 in
Release: Launched and available Aug. 26, 2026
SKU / config.: BS-10003 · UPC not published

Bersa USA · Hard-use multi-caliber rifle

B762

HUB 1.375×24 · included 5/8×24 direct-thread brake · full-auto rated

Bersa's larger Inconel-and-stainless HUB suppressor includes a 5/8×24 direct-thread brake and a maker-published full-auto rating. The product description lists nine compatible chamberings while its specification table unexpectedly says .243 Win; this record uses the description and flags the discrepancy instead of silently reconciling it.

Caliber: .300 Win Mag · .308 Win · 5.56 NATO · .223 Rem · 6 ARC · 6.5 Creedmoor · .300 PRC · 6.5 PRC · 7mm Rem Mag
Material: Inconel 718 · 17-4 H900 stainless steel · black high-temperature Cerakote
Weight: 17.2 oz
Length: 6.75 in
Release: Launched and available Aug. 26, 2026
SKU / config.: BS-10004 · UPC not published

Daniel Defense · Precision and multi-caliber rifle

MUTE 30Ti

Low-flow architecture · integral flash hider · HUB 1.375x24

A weldless, fully 3D-printed titanium .30-caliber suppressor with an integral flash hider and standard HUB mounting. Daniel Defense attributes sound, flash and field-of-view benefits to the low-flow architecture; those performance statements remain manufacturer claims.

Caliber: .30 caliber · .308 Win · 6.5 Creedmoor · .300 Win Mag · .300 PRC
Material: Weldless fully 3D-printed titanium · clear finish
Weight: 8.4 oz
Length: 6.86 in · 1.55 in diameter
Release: Current catalog · indexed Aug. 24, 2026 · launch date unpublished
SKU / config.: 06-140-17155 · UPC not published

Daniel Defense · Pistol, PCC and .300 Blackout

NULL 9Ti

High-flow architecture · Mini-HUB 1.125x28 · included 1/2x28 mount

A compact weldless titanium suppressor for 9mm and .300 Blackout using Daniel Defense's Mini-HUB mount. The maker attributes reduced blowback and sound benefits to its high-flow architecture; the product page's barrel and rate-of-fire restrictions control, and performance statements remain attributed claims.

Caliber: 9mm · .300 BLK subsonic · .300 BLK supersonic with maker restrictions
Material: Weldless fully 3D-printed titanium · clear Type II anodize
Weight: 4.4 oz on exact product page
Length: 5.08 in · 1.41 in diameter
Release: Current catalog · indexed Aug. 24, 2026 · launch date unpublished
SKU / config.: 06-140-16309 · UPC not published

One Horse · Lightweight carbine

ASHE 5.56

HUB 1.375x24 · included Plan B mount and Pyke three-prong flash hider

A compact titanium 5.56 suppressor with HUB compatibility and an included Plan B mount and flash hider. One Horse states that ASHE is not full-auto rated and should be allowed to cool during higher rates of fire; performance language remains an attributed manufacturer claim.

Caliber: 5.56 NATO / .223 Rem
Material: Grade 5 titanium · hardcoat Cerakote
Weight: 5.4 oz
Length: 6 in · 1.5 in diameter
Release: Current catalog · indexed Aug. 24, 2026 · launch date unpublished
SKU / config.: OH-ASHE556 · UPC 850078799753

One Horse · Lightweight multi-caliber rifle

RYN .30 Cal

HUB 1.375x24 · included Plan B mount and Pyke three-prong flash hider

A lightweight titanium .30-caliber suppressor listed for .308, .300 Blackout, 5.56 and 6.5 platforms, with HUB compatibility and an included Plan B mount and flash hider. One Horse states that RYN is not full-auto rated; performance language remains an attributed manufacturer claim.

Caliber: .30 caliber · .308 Win · .300 BLK · 5.56 · 6.5
Material: Grade 5 titanium · hardcoat Cerakote
Weight: 6.4 oz
Length: 6.7 in · 1.5 in diameter
Release: Current catalog · indexed Aug. 24, 2026 · launch date unpublished
SKU / config.: OH-RYN30 · UPC 850078799760

Dead Air Silencers · Patrol and duty rifle

CT5P Patrol

Compact Triskelion baffle · Gas Management System · fixed mounts

A compact, non-HUB duty suppressor offered with direct-thread, Xeno Gov, or KeyMo Gov mounting. Dead Air attributes reduced back pressure and operator fume exposure to its Compact Triskelion baffle and Gas Management System; those performance statements remain manufacturer claims.

Caliber: 5.56 NATO · 6mm ARC · 2,200 ft-lb energy rating
Material: Additively manufactured Haynes 282 · high-temperature Cerakote
Weight: 13.7 oz direct thread · 14.3 oz Xeno · 14.9 oz KeyMo
Length: 5.49 in direct thread · 5.89 in Xeno · 6.55 in KeyMo
Release: Current release · indexed Aug. 23, 2026 · maker launch date unpublished
SKU / config.: CT5PXNBLK · UPC 810128163873 (selected official-page configuration)

PTR Industries · Hard-use rifle

VENT Spiritus 5.56i

3D-printed PIP architecture with radial gas venting

A compact Inconel member of the VENT family that combines PTR's Purposely Induced Porosity geometry, HUB compatibility, and reduced-back-pressure gas management.

Caliber: 5.56 NATO · 5.7×28 · 4.6×30
Material: Inconel · DLC finish
Weight: 15.2 oz without adapter
Length: 6 in without adapter
Release: Current release · checked Aug. 22, 2026
SKU / config.: VS-5560101 · UPC 810161700394

SureFire · Fast-attach rifle

SOCOM556-RC4

Fourth-generation low-back-pressure flow dynamics

SureFire's fourth-generation SOCOM suppressor adds a revised muzzle, 60 percent lower back pressure than conventional designs, and backward compatibility with SOCOM Fast-Attach muzzle devices.

Caliber: 5.56 NATO
Material: Inconel superalloy
Weight: Not published on product page
Length: 6.3 in · adds 3.8 in
Release: Announced Dec. 3, 2025
SKU / config.: Manufacturer configuration dependent

HUXWRX Safety Co. · Multi-caliber

FLOW Range 36 Ti

Hybridized Flow-Through · 3D printed · HUB QD

A lightweight, fully 3D-printed multi-caliber design with hybridized Flow-Through technology, HUB compatibility, full-auto rating, and no manufacturer barrel-length restrictions.

Caliber: Pistol through .338-class rifle cartridges
Material: Grade 5 titanium · Cerakote
Weight: 8.4 oz · 12 oz with HUB QD
Length: 6.7 in · 6.92 in with adapter
Release: Current 2026 release
SKU / config.: Black or FDE

SIG SAUER HEXIUM suppressor family on a dark background — NewGE / SUP.0037

SIG SAUER · Low-back-pressure rifle

HEXIUM 556

Additively manufactured core · HUB · modular end cap

SIG's new family combines a 3D-printed low-back-pressure core, common HUB mounting, and a tool-less end-cap accessory system across 5.56, 7.62, and 300 BLK models.

Caliber: 5.56 NATO
Material: Titanium · high-temp Cerakote
Weight: 12 oz
Length: 6.2 in
Release: Current 2026 release
SKU / config.: HEXIUM556

SilencerCo · Modular rifle

Scythe STM

Two-length modular body · Bravo-compatible mounting

A full-auto-rated, stainless counterpart to the Scythe Ti that can be configured short for maneuverability or long for greater suppression and recoil reduction.

Caliber: .223 Rem / 5.56 NATO through .300 RUM
Material: Laser-welded 17-4 stainless steel
Weight: 10.4 oz short · 15.7 oz long
Length: 5.1 in short · 6.9 in long
Release: Introduced 2024 · current
SKU / config.: SU5421

Dead Air × Ruger · Hunting and precision rifle

RXD30Ti

3D-printed Triskelion + Nomad baffle system · integrated E-Brake

A ground-up Dead Air and Ruger collaboration with integrated recoil-reduction porting, HUB compatibility, and a new direct-thread brake mount for hunting and precision rifles.

Caliber: 6.5 Creedmoor / .308 Win through .300 PRC
Material: 6Al-4V titanium · Cerakote
Weight: 9.9 oz bare · 12.4 oz with mount
Length: 7.34 in
Release: Introduced Apr. 24, 2025
SKU / config.: RXD30TiBLK / RXD30TiBB

HUXWRX Safety Co. · Modular pistol and PCC

FLOW 45 M

Flow-Through · modular full/K configurations · fully 3D printed

A Grade 23 titanium modular suppressor that changes between an 8.5-inch full configuration and a 6.3-inch K configuration. HUXWRX states that it uses Flow-Through technology and is full-auto rated on a magazine-fed .45 ACP platform.

Caliber: .45 caliber · full-auto claim applies to magazine-fed .45 ACP
Material: Grade 23 titanium · C-Series high-temperature Cerakote
Weight: 7.4 oz full · 5.4 oz K
Length: 8.5 in full · 6.3 in K
Release: Current 2026 release · checked Aug. 20, 2026
SKU / config.: SKU / UPC not published by manufacturer

Faxon Twenty-Toucan modular suppressor and removable baffle components — CurrentGE / SUP.0041

Faxon Firearms · Modular rimfire and 5.7

Twenty-Toucan .22 Modular Suppressor

Serviceable six-baffle stack · modular short/full configurations

A fully serviceable 17-4 stainless suppressor with three standard and three perforated baffles. Faxon publishes four-caliber compatibility, a 1/2x28 direct-thread mount and full-auto ratings, with a five-inch minimum barrel for 5.7×28mm.

Caliber: .17 HMR · .22 LR · .22 Mag · 5.7×28mm
Material: 17-4 PH stainless steel · black nitride
Weight: 5.1 oz short · 8 oz full
Length: 3.87 in short · 5.78 in full
Release: Introduced at SHOT Show 2025 · checked Aug. 20, 2026
SKU / config.: FF-SIL-RF-MOD-22-01 · UPC 816341029033

BANISH · Competition-focused 6.5mm rifle direct thread / HUB

COMP 6.5 Ti

Six-baffle welded tubeless design · 5/8×24 direct thread · HUB compatible · two-port brake and flat 6.5mm cap included

BANISH launched this titanium model as the lighter member of its COMP 6.5 pair. The maker reports a 130.8 dB average at the shooter's ear with the flat cap and 142.9 dB with the brake on a 20-inch 6.5 Creedmoor bolt rifle; those figures are attributed manufacturer test results, not independent measurements. The exact page states that the suppressor is not full-auto rated.

Caliber: .22 Creedmoor through 6.5 PRC · .264 caliber
Material: Titanium · black or FDE Cerakote
Weight: 10.4 oz with brake · 8.7 oz without brake
Length: 6.65 in with brake · 5.50 in without brake · 1.61 in diameter
Release: Announced Sept. 24, 2026 · available now
SKU / config.: Black BX100000111541 · UPC 810171229731 · FDE UPC 810171229816

BANISH · Competition-focused 6.5mm rifle direct thread / HUB

COMP 6.5 SS

Six-baffle welded tubeless design · 5/8×24 direct thread · HUB compatible · two-port brake and flat 6.5mm cap included

BANISH launched this stainless model alongside the titanium COMP 6.5. The maker reports a 130.8 dB average at the shooter's ear with the flat cap and 142.9 dB with the brake on a 20-inch 6.5 Creedmoor bolt rifle; those figures are attributed manufacturer test results, not independent measurements. The exact page states that the suppressor is not full-auto rated.

Caliber: .22 Creedmoor through 6.5 PRC · .264 caliber
Material: Stainless steel · black or FDE Cerakote
Weight: 14.6 oz with brake · 12.2 oz without brake
Length: 6.65 in with brake · 5.50 in without brake · 1.61 in diameter
Release: Announced Sept. 24, 2026 · available now
SKU / config.: Black BX100000111578 · UPC 810171223616 · FDE BX100000111579 · UPC 810171223913

Maker contact file

Go directly
to the source.

Official routes for product questions, factual corrections, media requests, and industry cooperation.

Suppressor maker

Backdraft Suppressors

info@backdraftsuppressors.com Backdraft help center ↗

Suppressor maker

BANISH

888-781-8778 Silencer Central contact ↗

Suppressor maker

QuietFlow

QuietFlow contact form ↗

Suppressor maker

Off Grid Suppressors

sales@ogsuppressors.com 218-657-2264 Off Grid dealer inquiry ↗

Suppressor maker

Angstadt Arms

contact@angstadtarms.com Angstadt Arms contact ↗

Suppressor maker

Foxtrot Mike Products

info@fm-products.com Foxtrot Mike Products contact ↗

Suppressor maker

Derya Arms

+1 (904) 420-2923 Derya Arms contact ↗

Suppressor maker

US PALM

support@centuryarms.com US PALM contact ↗

Suppressor maker

CMMG

CMMG contact ↗

Suppressor maker

San Tan Tactical

info@santantactical.com 817-752-5423 San Tan Tactical contact ↗

Suppressor maker

HUXWRX Safety Co.

support@huxwrx.com 801-542-0425 HUXWRX support ↗

Suppressor maker

Taurus

Taurus contact ↗

Suppressor maker

Gemtech

Gemtech contact ↗

Suppressor maker

TENET

TENET contact ↗

Suppressor maker

Dead Air Silencers

info@deadairsilencers.com 801-857-4232 Dead Air contact form ↗

Suppressor maker

Bersa USA

rafael@bersausa.com Bersa USA contact ↗

Suppressor maker

Daniel Defense

1-866-554-GUNS Daniel Defense contact ↗

Suppressor maker

One Horse

812-200-0305 One Horse contact ↗

Suppressor maker

PTR Industries

cs@ptr-us.com 843-358-2222 PTR marketing and media ↗

Suppressor maker

SureFire

800-828-8809 SureFire general inquiries ↗

Suppressor maker

SIG SAUER

media@sigsauer.com 603-610-3000 SIG SAUER media inquiries ↗

Suppressor maker

SilencerCo

info@silencerco.com 801-417-5384 SilencerCo contact ↗

Suppressor maker

Dead Air × Ruger

info@deadairsilencers.com 801-857-4232 Dead Air contact ↗

Suppressor maker

Faxon Firearms

customerservice@faxonfirearms.com 513-280-8861 Faxon customer service ↗

Federal process pages rechecked · November 10, 2026

ATF changes its NFA enforcement posture.

ATF says it will not enforce the NFA's prior-approval, registration, tax-stamp, marking and related requirements for silencers, short-barreled rifles, short-barreled shotguns and “any other weapons” covered by the agency's October 9 guidance. Voluntary NFA registration remains available. Machine guns and destructive devices remain subject to all NFA requirements, and businesses must continue paying applicable special occupational taxes.

This is an enforcement-discretion policy, not a repeal of the statutes. ATF says Gun Control Act requirements, Form 4473 and NICS obligations for licensee transfers, and state and local laws still apply. The agency also warns that enforcement could resume if legal or factual circumstances change and that unregistered items are not automatically grandfathered. Its current FAQ says businesses manufacturing silencers before November 20, 2026, must also register with the Department of State under ITAR. Gun Editions is an information archive, not a dealer or legal authority; readers should review the complete official guidance and their applicable state and local law.

ATF's separate August 28 letter continues to address repair and caliber changes for complete registered silencers. The agency's processing page still reports August 2026 averages of 20 days for trust eForm 4 and 6 days for individual eForm 4, with a 5-day individual median; those are historical figures, not a promise for any application. ATF refreshed its NFA Division contact page on October 20 without changing those processing figures.

Read the October 9 ATF guidance and FAQ ↗Open the NFA Division contacts ↗Open current ATF processing data ↗Read the August 28 repair letter ↗Open current ATF eForms guidance ↗

MAKE OR REPRESENT A SUPPRESSOR BRAND?

Help us preserve the release correctly.

Send official images, press materials, launch dates, model specifications, MSRP, SKUs, UPCs, and corrections. Commercial participation never buys an editorial claim.

Open the industry desk ↗

Quiet is onlypart of the story.

Hunter

HD 762 INC

AIRCHOPA 30Ti

ENGINE NO. 9

THROTTLE 22Ti

22-WHISTLER

Scorpius

MERC

MENACE

MINI MENACE

AGENT INCO 9K

Vanquish 22 M81 Woodland Limited Edition

ISU-9

OBone

EOS-556

EOS-30

EOS-30Ti

EOS-AK

ZEROED 22 Mute-ish

1836 Frontier 5.56

1836 Frontier .30

FLOW 9 M

FLOW 9k PCC

TTX22

TTX9C

TTX30

FLOW 556 Ti

NEUTRINO

NEBULA 5.7

VESPER 30

VESPER 6.5

Reticent 360L

Reticent 360S

Reticent 22

Nomad Ti OTB

B22

B9

B556

B762

MUTE 30Ti

NULL 9Ti

ASHE 5.56

RYN .30 Cal

CT5P Patrol

VENT Spiritus 5.56i

SOCOM556-RC4

FLOW Range 36 Ti

HEXIUM 556

Scythe STM

RXD30Ti

FLOW 45 M

Twenty-Toucan .22 Modular Suppressor

COMP 6.5 Ti

COMP 6.5 SS

Backdraft Suppressors

BANISH

QuietFlow

Off Grid Suppressors

Angstadt Arms

Foxtrot Mike Products

Derya Arms

US PALM

CMMG

San Tan Tactical

HUXWRX Safety Co.

Taurus

Gemtech

TENET

Dead Air Silencers

Bersa USA

Daniel Defense

One Horse

PTR Industries

SureFire

SIG SAUER

SilencerCo

Dead Air × Ruger

Faxon Firearms

ATF changes its NFA enforcement posture.

Quiet is only
part of the story.